IKEA SORTERA Trash Bag Holder Frame
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A frame designed to securely hold trash bags in place within the IKEA SORTERA recycling bin, preventing slippage.
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 66
- Makes
- 0
- Views
- 406
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial
The IKEA SORTERA is a popular stackable recycling bin, but one common issue is that trash bags tend to slip down inside, especially when filling them up. This 3D model is a custom-designed frame that fits snugly along the inner rim of the SORTERA bin, allowing you to fold the bag's edges over it for a secure hold. It eliminates the frustration of bags collapsing inward and makes emptying or replacing them much easier.
Key Features:
- Compatible with standard IKEA SORTERA bins (this fits the 37L and 60L).
- Prevents bag slippage without modifying the original bin.
- Stackable-friendly: Doesn't interfere with stacking multiple SORTERA units.
Printing Recommendations:
- Model dimension : 360mm x 157,5mm x 15mm (Prusa XL or equivalent with at least 360mm on print bed)
- Material: PLA or PETG.
- Infill: 15% or higher (not much infill anyway)
- Layer Height: 0.25mm
- Supports: None required if printed flat on the bed.
- Print Time: Approximately 1-2 hours. (1h36 15%, 2h12 100%)
This model was created to solve a everyday problem with a minimalist design. If you print it, feel free to share your makes or suggestions for improvements!