Průša Mini display holder
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Průša Mini display holder for mounting on the cabinet. In this case, IKEA Platsa is used.
- Rating
- 5 / 5
- Likes
- 8
- Downloads
- 20
- Makes
- 1
- Views
- 442
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial
Průša Mini display holder for mounting on the cabinet. In this case, IKEA Platsa is used.
If you are interested in this cabinet, I recommend the models Ikea Platsa Modular Dual Prusa Enclosure (MINI/MK3s/Bear)
I recommend using PETG material for printing, but PLA or ASA can also be used. The front part stands out best printed on a granular plate. Supports are not needed. Even the Tunnel printer did without support.
If you would like the knob from the photo, you can find it here: Prusa display control knob
Recommended settings:
- material: PETG
- layer height: 0.2 mm
- support: no
Hardware:
- 2 pcs Screws M3x22 (screw length according to plate thickness) (Aliexpress)
- 2 pcs Nuts M3 (Aliexpress)
- Cable Wire 70cm (possibly more, as needed), 14pin (Aliexpress)