Waste chute for Qidi Plus4 - uses openGrid backplate
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Waste chute for Qidi Plus4 printer. Securely mounts to the back of the printer using my openGrid back cover.
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 11
- Makes
- 0
- Views
- 193
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
Mounts to my openGrid backplate and your choice of openGrid to MultiConnect adaptor. I used the “opengrid Multiconnect lock snap”( https://www.printables.com/model/1214361-opengrid-walldesk-mounting-framework-and-ecosystem/files) from David D.
The small flange around waste opening (green part in my CAD image) is to close the gap between the waste opening and the waste chute, although the chute works fine for me without this part as well.
This chute mounts securely while being easy to remove as needed. I don't provide a collection bin for the waste material, but storage bin designs are readily available elsewhere on this site to suit your application.
Print in orientation shown in the screen shot of Qidi Studio. All overhangs are 45 degrees, so no supports are necessary. PLA would work great, but I had good results with ABS as well.
Link to my openGrid backplate: https://www.printables.com/model/1414739-qidi-plus-4-opengrid-backplate