1 / 2
Remix of the Turing Smart 3.5" Display Mount – with side plate for rack mounting using cage nuts.
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a remix of the TURZX Turing Smart 3.5" PC Health Monitor IPS Screen Mount to be used on rack rails.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 15
- Makes
- 0
- Views
- 193
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial
This is a remix of the TURZX Turing Smart 3.5" PC Health Monitor IPS Screen Mount.
I added a side plate with standard holes for cage nuts, so the display can be mounted directly to rack rails in a homelab server cabinet. This makes it possible to integrate the Turing 3.5" health monitor neatly into your rack setup instead of leaving it loose on the desk.
The plate is dimensioned for typical rack rails, with hole spacing suitable for standard M6 cage nut installation.
- Print in a strong material (PLA+ or PETG recommended) for better rigidity.
- Orientation: print the side plate flat on the bed for maximum strength.
- You will need standard M6 cage nuts and rack screws.
- The display module slots in the same way as in the original design – only the mounting method is different.Print in a strong material (PLA+ or PETG recommended) for better rigidity.