Add Wood Grain Effects to Your Models (PrusaSlicer Version)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
PrusaSlicer 3MF with modifier mesh for wood grain effects. Based on PandaN’s method, re-created for compatibility.
- Rating
- 4.824 / 5
- Likes
- 605
- Downloads
- 1,666
- Makes
- 18
- Views
- 9,741
- Reviews
- 17
Updated at source:
Model information
- Source
- Printables
- Category
- Other Art & Designs
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This project is based on the excellent work of MakerWorld user PandaN, who shared a method for adding wood grain effects to 3D prints using a modifier mesh shaped like a log. However, the original 3MF is only compatible with Bambu Studio, and cannot be opened in PrusaSlicer. This upload re-creates the setup for PrusaSlicer users.
What you’ll find in this file:
A pre-configured 3MF file that works directly in PrusaSlicer.
The included modifier mesh (log with concentric rings) set up to apply the correct print settings.
A simple sample cube (“replace me”) so you can test the technique immediately.
You don’t have to use a log as the modifier - any organic mesh can give unique textures. Experiment with different shapes to mimic leather, stone, or woven patterns.
Tutorial for creating textures with a modifier model:
Note: You don’t need to follow these steps to use the included 3MF - it’s already pre-configured. This guide is just here if you want to understand how the setup works or adjust it for your own projects.
PandaN's method uses a modifier mesh (in this case, a model of a wood log) to apply special print settings only to the parts of your model that the modifier touches. By tweaking infill angles, top/bottom fill patterns, and adding fuzzy skin, you can imprint a convincing wood grain texture directly into your prints.
Step 1 – Switch to Expert Mode
In PrusaSlicer, go to the mode selector (top right) and switch to Expert mode.
This unlocks the advanced modifier options you’ll need.
Step 2 – Add the Modifier Mesh
Place your model on the build plate.
Right-click your model → Add modifier → Load… → From Gallery.
In the gallery window, click Add and load your modifier STL (e.g.,
log-wood-grain-modifier.stl).Select it in the gallery and click OK.
Align/scale the modifier so it fully covers the part of your model you want textured.
Step 3 – Apply Settings to the Modifier
On the right-hand side panel, you’ll now see the modifier listed beneath your model (with a small cogwheel).
Click the cogwheel → Add settings.
Add:
Fuzzy Skin
Infill
Layers & Perimeters (optional, but recommended for strength and clean layering)
These settings will apply only where the modifier overlaps your model.
Step 4 – Recommended Starting Settings

Fuzzy Skin
Enable Fuzzy skin on outer walls
Fuzzy skin point distance: 1 mm
Fuzzy skin thickness: 0.08 mm
Infill
Fill angle: 135° (important: use ~90° offset from the global infill angle, which defaults to 45°)
Fill pattern: Grid (but experiment with others)
Top fill pattern: Aligned rectilinear
Layers & Perimeters
Use at least 2 solid layers top/bottom.
I’ve had best results with 4 solid layers in testing.
Slice and check to ensure the top and bottom show the pattern clearly.
Step 5 - Slice & Print
Slice your model and preview the toolpath - you should see distinct texture variations where the modifier overlaps. On the finished print, the combined infill orientation, fuzzy skin, and layer choices will create a natural-looking wood grain effect across the surface.
Example prints and post processing:
@ManelTo designed this tray and treated it with varnish to really bring the wood effect to life:
These examples are untreated, and all printed in Sunlu wood fiber PLA of various colors.

