Thrustmaster t300 fixation foot
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
One of the non-slip feet on the mounting bracket of my t300rs gt broke, so I measured the original and modelled an ident
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 43
- Makes
- 0
- Views
- 92
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Video Games
- License
- Creative Commons — Attribution — Noncommercial
EN:
Recommended filament: PETG
Recommended layer height: 0.1mm
Recommended infill: 30%
Recommended wall count: 4
You can use these settings for strength.
NOTE: If you print the clip section with 100% fill from the slicer's modifier settings, the likelihood of breakage decreases.
TR:
Önerilen filament: PETG
Önerilen katman yüksekliği: 0,1 mm
Önerilen İç dolgu: %30
Önerilen duvar sayısı: 4
Bu ayarları mukavemet için kullanabilirsiniz.
NOT: Dilimleyicinin modifier ayarlarından klips bölümünü %100 dolgu ile yazdırırsanız, kırılma olasılığı azalır.