1 / 4
Moto Guzzi Wall Sprocket
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Wall sprocket that has the Moto Guzzi logo added to it for your shop or office.
- Rating
- 5 / 5
- Likes
- 5
- Downloads
- 54
- Makes
- 1
- Views
- 125
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Wall-mounted
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Wall sprocket with the Moto Guzzi logo. On my Bambu P1S to get the fine detail for the eagle you will have to print this with a 0.2mm nozzle to get the fine detail to show clearly. Even if you make it bigger it will not be perfect. The sprocket is about 0.300" thick and will take about 9 hours with a 0.2mm nozzle. I would use PLA black and silver to make this part.