AMD Instinct MI50 shroud
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a shroud for the AMD Instinct MI50 (32GB) graphic card to replace the original one completely.
- Rating
- 5 / 5
- Likes
- 22
- Downloads
- 400
- Makes
- 1
- Views
- 3,880
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial
This is a fan shroud which replaces the original one of the AMD Instinct MI50 (32GB). It uses a blower fan which is able to cool the card at a pwm value of 65%.
I'm using three cards like this on one mainboard and their temperatures are well below 85°C (pwm at 65%) at maximum load.
No modification of the card needed, you just need to replace the original shroud with this one.
The card still needs 2 slots only.
You will need aditionally:
1x BASA0725R2U blower fan
3x M2x4 counter sunk screws for mounting the fan
5x M2x6 screws (coarse thread) for mounting the fan shroud on the graphic card shroud
optional:
6x M2x3 flat head screws (for mounting the shroud on the graphic card, the original counter sunk screws might not be the best choice with plastics)
the following is only needed if you want to make the fan adapter:
1x M1.4x5 for the connector mount
2x M3x8
1x JST XH 2.54 , 4 pin connector
1x JST XH 2.0 , 4 pin connector
1x 4 pin Molex KK 254 (i just bought some 4 pin fan extension cables and cut off the male connector)