Raspberry Pi Zero mounting plate for Pololu Zumo
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Designed a plate for mounting the Raspberry Pi Zero W to a Pololu Zumo robot along with a camera mount.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 15
- Makes
- 0
- Views
- 379
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution
Designed a plate for mounting the Raspberry Pi Zero to a Pololu Zumo robot along with a camera mount. This uses 4 stand-offs to raise the board so that the Zumo base board and onboard motor controller can be used with the RPi.
For the stand-offs, I printed 4 and scaled the Z axis to my required height (20mm). The screws used are #2-56 and 1/4" length (https://www.amazon.com/dp/B00F34TWZC?psc=1&ref=ppx_yo2_dt_b_product_details). These are the same that come with the zumo robot.
I have also included the base plate without a camera mount. I appreciate any feedback, Thank you!