1 / 3
Robovac Door Ramp
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Door ramp for a vacuum robot. My threshold has two steps, 16mm and 12mm. Connect pieces to fit different door width.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 24
- Makes
- 0
- Views
- 178
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial
This is a door ramp I designed for a roborock vacuum robot. My threshold has two steps, 16mm and 12mm high. The ramp is made of several pieces that can be connected using dovetails. It's quite lightweight and uses less material. I printed it in PETG, and it's plenty strong enough for the robot but not for walking on. For a 80 cm wide door use normal 1 - 5. There are some shorter as well to configure other lengths to match your door