1 / 2
80 mm Fan Solder Fume Extractor
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Small battery powered fume extractor using an 80 mm fan and activated carbon to filter solder fumes.
- Rating
- 5 / 5
- Likes
- 9
- Downloads
- 38
- Makes
- 2
- Views
- 310
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Share Alike
This was made using a TP4056, a toggle switch, a boost convertor, some activated carbon, and a high static pressure 80x25 mm 12V fan. The magnets I used were 5x2mm. It gets enough airflow to suck in fumes from about an inch or two away, which is acceptable for a battery powered mobile tool to complement my Pinecil.