1 / 3
Shark Powerdetect Vacuum (IP1251) Attachment Holder
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
On-vacuum holder for included attachments. Requires 2x M3 screws, but will probably work with small zip ties.
- Rating
- 5 / 5
- Likes
- 10
- Downloads
- 69
- Makes
- 1
- Views
- 520
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Not sure if this will fit the other Powerdetect models. I read they're picky for some things. Printed in PLA. Should probably up the perimeter count if you bang this on things going under furniture.
Requires two M3x16 screws and nuts, but might work with small zip ties. One of the screws is harder to get in since it's tucked in between the mounts. Might turn it into a hinge in the future and an easier to remove design.