TP Holder w/ Resistance
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Toilet Paper holder with some resistance (so it tears well).
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 5
- Makes
- 0
- Views
- 46
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Home Decor
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Description
My family and I have been sick as dogs this week. We use Charmin Ultra Soft as our facial tissue, so there are toilet paper rolls all over the house. I designed this so we can mount it to the wall with two large command strips (or 4 small). The size is just right so that when you pull slowly the TP unrolls, but when you pull fast it breaks making it so you can grab TP with one hand. I am not sure how it will fit in other TP rolls, but it works perfect in charmin.
Parts
None
Assembly
None
On Other Sites
On thingiverse, jumping ship, may take down there. - https://www.thingiverse.com/thing:2029257
Edits
01/11/17: I printed another one of these in low res and noticed that there was a gap in the print. This has been fixed in the new file (removed the old).
01/13/17: Ok, so my toddler basically hung on one of these and ripped the holder and some plaster off the wall (yeah!). So, I made a screw-in version of this. I designed these to be used with the TOGGLER self-screwing anchors which can hold ~80lbs each and I highly recommend. I also made up a template for marking and spacing the screw holes.
Attributions
None, my original design.Description
My family and I have been sick as dogs this week. We use Charmin Ultra Soft as our facial tissue, so there are toilet paper rolls all over the house. I designed this so we can mount it to the wall with two large command strips (or 4 small). The size is just right so that when you pull slowly the TP unrolls, but when you pull fast it breaks making it so you can grab TP with one hand. I am not sure how it will fit in other TP rolls, but it works perfect in charmin.
Parts
None
Assembly
None
On Other Sites
On thingiverse, jumping ship, may take down there. - https://www.thingiverse.com/thing:2029257
Edits
01/11/17: I printed another one of these in low res and noticed that there was a gap in the print. This has been fixed in the new file (removed the old).
01/13/17: Ok, so my toddler basically hung on one of these and ripped the holder and some plaster off the wall (yeah!). So, I made a screw-in version of this. I designed these to be used with the TOGGLER self-screwing anchors which can hold ~80lbs each and I highly recommend. I also made up a template for marking and spacing the screw holes.
Attributions
None, my original design.