The Rocks image - HueForge
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
The Rocks image - 180.71x240mm - HueForge - Frameless - Created from photo
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 9
- Makes
- 0
- Views
- 89
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- 2D Plates & Logos
- License
- Creative Commons — Attribution — Noncommercial
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 180.71x240mm in size
You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 1.52mm and the Actual Thickness is 1.44mm
Filaments Used:
#000000 PLA+ HIGH SPEED Jamg He Black Transmission Distance: 0.3
#8b8f98 PLA 3DLogic Dark Gray Transmission Distance: 0.3
#c4c4c4 PLA HIGH SPEED 3DPower Telegrey Transmission Distance: 3.1
#ffffff PLA Alzament White Transmission Distance: 5.6
This print uses 4 unique filaments
Swap Instructions:
Start with Black
At layer #7 (0.64mm) swap to Dark Gray
At layer #8 (0.72mm) swap to Telegrey
At layer #10 (0.88mm) swap to White for the rest.