1 / 3
Spool Brake (3kg) for Bambu Lab Filament Spool Switcher & Donor Spool Frame 2
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A redesigned spool brake to work for 270mm 3kg spools and be mounted to the original base using M4 bolts.
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 45
- Makes
- 0
- Views
- 233
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
How To Print: Spool Brake Base
- Material : petg, abs
- Layer Height : 0.2mm (0.24 is great if your machine and filament are calibrated properly)
- Infill : 30%
- Wall Loops : 3
- Bottom Layers : 4
- Top Layers : 4
- Support : No
- Brim : No
How To Print: Brake Lining
- Material : TPU, PETG (I also tried nylon (PA), but it's a tricky filament to work with)
- Layer Height : 0.2mm (0.24 is great if your machine and filament are calibrated properly)
- infill : 30%
- Wall Loops : 3
- Bottom Layers : 3
- Top Layers : 3
- Support : No
- Brim : No
