Prusa Mini ESP32 Cam
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€1.13 – €1.38 net (excluding VAT)
For file: Prusa_Mini_Kamera_ASA_0.4n_0.2mm_PETG_MINIIS_1h15m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €1.26 excluding VAT (range midpoint).
- Weight reported by the author
- 17 g
- Print time reported by the author
- 1.25 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Nozzle cam for the Prusa Mini.
- Rating
- 5 / 5
- Likes
- 3
- Downloads
- 18
- Makes
- 1
- Views
- 189
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
The goal here was to mount a camera despite using the https://www.printables.com/model/396461-prusa-mini-z-axis-support-brace-by-maxt-remix
The other camera mounts I found collided with the Z-axis support.
That's why I made this one to solve the problem.
Good ventilation was also important to me.
Wherever possible, material was saved to achieve this goal.
It's still tight, but it's enough.
One disadvantage is that supports have to be used.