KlipperExpander Box
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Box to enclose KlipperExpander, SSR for chamber heating, cooling fan...
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 4
- Makes
- 0
- Views
- 67
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Public Domain
I designed this so I can use a PTC heater for my 3D printing enclosure. I am using an Omron SSR and a PTC heater. There is a mount location for a buck converter in case you want to run your fan and other devices at a different voltage than the VIN.
Heater: https://www.amazon.com/dp/B0BTYFXQKS?ref_=ppx_hzsearch_conn_dt_b_fed_asin_title_1&th=1
Omron SSR: https://www.digikey.com/en/products/detail/omron-automation-and-safety/G3NA-220B-UTU-DC5-24/1789953
Buck Converter: https://www.amazon.com/dp/B01MQGMOKI?ref_=ppx_hzsearch_conn_dt_b_fed_asin_title_1
I am also using https://www.amazon.com/dp/B0CS6K1TM4?ref_=ppx_hzsearch_conn_dt_b_fed_asin_title_1&th=1 for air filtration when printing toxic filaments.
The cable strain reliefs need to be printed separately and then glued to the main box. There are holes for zip ties to secure the cables afterward. I am also using Wago connectors for ease of wiring.
You will need 4 of M3xOD5xL4 (same as Voron) heatset inserts for the cover of the box. For the SSR, either use M4 bolt+nuts or the same M4 inserts as above.