SK-Tank Carriage Strain Relief
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I had a couple of extruder* wires break at the connector due to flexing while printing. This is a small piece that…
- Rating
- 5 / 5
- Likes
- 2
- Downloads
- 10
- Makes
- 0
- Views
- 135
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution
I had a couple of extruder* wires break at the connector due to flexing while printing.
This is a small piece that provides strain relief for the wire bundle coming from the extruder/hotend on the Seckit SK-Tank. It attaches to back of the carriage, facing forward, using the top center screw hole. Then you can zip tie the wire bundle in the channel so that the wires don't move from there down.
Print Settings
Printer:
SecKit SK-Tank
Rafts:
No
Supports:
No
Resolution:
200
Infill:
40
Filament:
PolyMaker ASA
Blue
Category: 3D Printer Accessories