10" Rack mount for TP-Link LS108GP
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
10" Rack mount for TP-Link LS108GP
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 148
- Makes
- 0
- Views
- 534
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This bracket is made for 10" racks. They have the standard dimensions of 1U (44.5mm) in height and 250mm in width. With these dimensions the mount can be printed on a print bed with the dimensions of 220mm x 220mm. The mount is designed to hold the unit firmly in place without loosening. Therefore, the use of screws to hold the unit in place is optional.This bracket is made for 10" racks. They have the standard dimensions of 1U (44.5mm) in height and 250mm in width. With these dimensions the mount can be printed on a print bed with the dimensions of 220mm x 220mm. The mount is designed to hold the unit firmly in place without loosening. Therefore, the use of screws to hold the unit in place is optional.
I'm using the pin clips by Finkerton to retain the switch in the caddy.