Front cover for Qidi Plus 4 head (beacon mod)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Cover fits only remixed stew675's Beacon bracket
- Rating
- 0 / 5
- Likes
- 20
- Downloads
- 112
- Makes
- 1
- Views
- 610
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
>>>>Cover fits only remixed stew675's Beacon bracket<<<<
Front cover for Qidi Plus 4 head. Fits on remixed stew675's Beacon bracket which can be found here :
https://www.printables.com/model/1423344-stew675s-beacon-bracket-with-hot-end-air-duct-for
Most important, cover is same width as original one unlike other for this beacon bracket
Requires 3 magnets dia. 4mm x 1.6mm (1 for bracket and 2 for cover)
when printing please place seams away from edges as per image below
I have attached choice of three models to be printed with
- QIDI Box ( AMS )
- no box
- no logo on both parts
Assembly is easy as you just need to press small front fascia into main cover, for more secure glue can be used or just melt ends with hot knife
Tried this cover for at least 15 hours and found it secure to use
Cover was printed in PC blend with PETG (110 celsius resistant) , logo fillings are ABS
Cover weights less than original one
Any questions please DM me