1 / 4
MODU car wheel
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Modu print-in-place car wheel
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 16
- Makes
- 0
- Views
- 155
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Building Toys
- License
- Creative Commons — Attribution
Printed with 0.8 nozzle (because that's what I used at the time - you can print with 0.4 no problem), PLA on my neptune4 pro.
In your slicer import the two stls, orient them correctly and center them. There will be a tiny gap between the objects. You can check layer by layer to see if there is any interference.
I suggest you to reduce printhead acceleration, since i had a couple of failed tries due to belt slipping, always when there was a lot of material on the plate (so at higher layers).
You can add a modifier to have a different color rim.