1 / 1
Acceleration Real Check
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Acceleration test model
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 8
- Makes
- 0
- Views
- 54
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Test Models
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This model was created because, in my experience, standard square acceleration tests produce false results. Printing at right angles is the "easiest" test, many printers that print without echo at up to 25k acceleration at right angles can produce terrible echo at angles of 10-20-30-40 degrees.
The height step is 3 mm, printing in 2 perimeters.it is well suited for any diagnostic tests - VFA, shaper frequency, SCV, etc.
Example of test code
SET_VELOCITY_LIMIT MINIMUM_CRUISE_RATIO=0
TUNING_TOWER COMMAND=SET_VELOCITY_LIMIT PARAMETER=ACCEL START=3000 STEP_DELTA=2000 STEP_HEIGHT=3