Modified btm_cover/lid for antenna and tinyshield for Outdoor device for measuring air quality
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
btm_cover for Outdoor device for measuring air quality box to mount antenna and Laskakit sensors under tinyshield.
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 5
- Makes
- 0
- Views
- 110
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Attribution — Share Alike
Modification of this awesome housing from @VladimirWaas_694872 for air quality sensor to accommodate additional sensors and external antenna. Designed to fit Laskakit I2C sensor board with breakout sensor part with 2x2 pin header footprint (e.g. SHT40, BMP280). Hole for antenna will fit SMA connector (M6). Only modified part of the original design is btm_cover.stl

For easier sensor connection I designed small, simple extension PCB with two 2x2 pin socket connectors and two uŠup connectors.T he PCB is manufactured at 1 mm thickness, but this is not mandatory. Manufacturing data and Kicad project are included. To fit this PCB in different boxes/enclosures, negativ model of PCB with connectors and parts is also attached. This can be imported to PrusaSlicer as negative volume to cut necessary openings.


Sensors are connected from the outside and covered by handy tinishield designed by @mnux_298325.

BOM:
- 1x btm_cover from this remix (.stl or .3mf)
- 1x custom extension PCB, can be replaced with prototyping board (2.54 mm pitch)
- 1x uŠup cable
- 2x M3 threaded inserts (to mount tinyshield)
- 2x M3 screw
- tinyshield set:
- 5x radiation-shield.stl
- 1x radiation-shield-bottom-screw.stl