1 / 1
DIN Rail Holder for M6 cap head screws and endcap — image 1

DIN Rail Holder for M6 cap head screws and endcap

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

I used these on my V-Core 3 to mount the DIN Rails without having to drill too many holes into the rails itself

Rating
4.75 / 5
Likes
73
Downloads
513
Makes
3
Views
2,063
Reviews
4

Updated at source:

Model information

License
Creative Commons — Attribution — Share Alike

I used these on my V-Core 3 to mount the DIN Rails without having to drill too many holes into the rails itself. Beside of that, they look pretty neat.

My DIN-Rails are “Weidmüller Tragschiene TS 35X7.5 2M/AL/BK 0330800000”

I printed these in eSUN ABS+ with a 99.5 shrinkage modifier in SuperSlicer. Your milage may vary with different filaments and different DIN rails.

If mounted on a V-Core 3, the stock M6x12 screws can be reused if the electronic panel is not thicker than 3mm. However you will have to firmly press the screws in until they will grip.

The endcap should be a more tight fit because there is no screw to press the rail against the back.

Rail length for a V-Core 3 400 is 560mm using these holders and the hole in the middle therefore should be drilled at 280mm.

Tags