BMW 2002 (1970) RC CAR BODY at 1/12
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Very detailed BMW 2002 body -wheelbase is 208 mm ; use as much as 7 filament colors even if you do not own a MMU !
- Rating
- 0 / 5
- Likes
- 27
- Downloads
- 138
- Makes
- 0
- Views
- 714
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Vehicles
- License
- Creative Commons — Attribution — Noncommercial
So this is a RC CAR body version of my BMW 2002 toy-car with a 208 mm wheelbase which is exactly to scale to the original car.
I'm also working on a RC chassis which will use this body; when ready the link will be here.
If you have printed both my Peugeot 3008 and my BMW 2002 toy-cars at the same scale of 1/24, you know there is not a lot of space under the hood in the BMW 2002 compared to the 3008 as these cars are separated by 55 years of automotive evolution.
It is going to be very difficult to miniaturize all the components you've seen in my previous RC cars. The UNIMOG was huge and my RCCAR V2 quite big. My Peugeot 3008 RC car chassis was already a challenge as I managed to design a Mc Pherson strut front suspension with a front wheel drive and rear torsion bar suspension. And a gearbox that fits under the hood !
So the BMW2002 chassis will be a very simple “no suspension” propulsion chassis but should provide a lot of fun indoors or on pavement.
Now about mounting the body itself:
There are 8 folders containing the STL files grouped by color. Obviously you can choose your own colors.
You should assemble first the 3 main parts using M3 screws. The other parts should be glued.
There is a specific middle body with a hole. This should allow to mount the body on my chassis (to come). If you are using another chassis you will need to drill your own holes (you would then use the middle body without a hole).
Looking at the pictures of the model, it is pretty easy to see where each part goes.
If you encounter any issue with the assembly please reach out.
This first release does not have print files (I usually give print files also even though you might have a different printer so you can see what orientation and support choices I've made).