Small HP Grommet Screw for 2.5" SSD EliteOne 800 G2 AIO
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Allows you to use existing M3 screws for mounting 2.5" drives in new HPs. Other versions were too big.
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 38
- Makes
- 0
- Views
- 183
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
The original design did not fit the HP Eliteone 800 G2 AIO. Even though at first glance it looks compatible. The diameter on the base is different. I'm not sure what other models use this smaller size, but I'm sure it's not a once off.
Honoredtwig's design allowed you to use a regular 8mm screw. I've included different lengths, so you can use 5 or 6mm screws (commonly used for PCs). A washer if you have a 4 or 5mm caphead screw. And a 5mm countersunk screw version, which is what we had on hand.
This has been designed in OnShape if you need to make modifications
