Straight Edge Round Mini Bases
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.07 – €0.08 net (excluding VAT)
For file: Half Inch Hollow Straight Edge Round Mini Base.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.07 excluding VAT (range midpoint).
- Weight reported by the author
- 1 g
- Print time reported by the author
- 4.2 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Straight edge, round, mini bases in 0.5", and from 1" to 4" in 1" increments. Both Hollow and Solid versions.
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 21
- Makes
- 0
- Views
- 96
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Miniature Gaming Accessories
- License
- GNU General Public License v3.0
I like straight edge round mini bases, but they seem hard to find, so I made my own. They are available in 0.5", and from 1" to 4" in 1" increments. Both Hollow and Solid versions.
The bases are configurable via parameters in the FreeCAD file. Click on Base in the Model tab, and in the Data tab you will see a section called Parameters.
You can choose between the predefined sizes from the Base Diameter dropdown, or set it to Custom and adjust the value of the Custom Base Diameter parameter.
You can switch between a hollow or a solid base by toggling the Hollow checkbox.
You can change the base height, wall thickness and inset depth by adjusting the values of the respective parameters.
If you like my work, you can support me, by tipping me here: https://revolut.me/ifohancroft
License ©
Copyright 2025 IFo Hancroft
Straight Edge Round Mini Bases is licensed under GNU General Public License version 3, or any later version.