SawStop miter bar for feather board - 5/16" hardware
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Miter bar for featherboard with 5/16" hardware, fit for SawStop PCS
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 22
- Makes
- 0
- Views
- 80
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial
The original worked well with 5/16" hardware, but I found that it wasn't very strong when I tightened things down on my SawStop PCS. I increased the height of the upper part of the bar by 2.5 mm since there was ‘unused’ height in the miter slot, which improves the strength. It is 9.5 mm (.375") tall overall.
Printed in PLA. 30% Gyroid infill.
If you want the holes to look perfect, use support. I didn't use support (forgot), and it printed out pretty well. If I need to print it out again, I intentionally won't use support.
FreeCAD file included if you want to modify it.