1 / 1
eufyMake E1 Isolation Feet
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Isolation/Riser Feet to raise the E1 off the surface and to help eliminate any extra vibrations.
- Rating
- 5 / 5
- Likes
- 12
- Downloads
- 35
- Makes
- 1
- Views
- 342
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other Gadgets
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Just some simple feet to raise your eufyMake E1 UV printer off the surface. Can print in TPU to also act as simple vibration isolators. I printed mine with 2x 0.4mm walls and 15% tri-hexagon infill on top and bottom 25% and 1x 0.6mm wall and 5% Archimedean Spiral infill on middle 50% but depending on your TPU you'll want to test for yourself.
Including .step file if you need to raise or lower or prefer to model in your own infill.
https://buymeacoffee.com/psycho3d if you'd like to support my work.