1 / 1
M12 Bolt Cap (acorn nut without threads)
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
M12 bolt cap
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 27
- Makes
- 0
- Views
- 92
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial
I needed a cap for a bolt that stuck out too far. Could run into this, gently, and be fine.
Printed in TPU, .2mm layers, 2 walls, 5 top, 3 bottom, 15% grid infill
Modeled this in Fusion - Parameterized so you can edit.
“ThickerWalls” file parameters:
- BoltDiameter = 12.24mm
- BoltLength = 18mm
- CapWallThickness = 6mm
- CapEndThickness = 8mm