Držák na mobil/tablet s dírou pro kabel na nabíjeni
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Držák na mobil/tablet s dírou pro kabel na nabíjeni
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 30
- Makes
- 0
- Views
- 91
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Public Domain
Print Settings (slicing in PrusaSlicer):
Layer height 0.15mm (0.2 is possible too, but 0.15 is nicer) – specifically I use 0.15 BALANCED.
Nozzle is standard 0.4mm but it doesn't matter.
Material PLA.
Infill is also basically irrelevant (I personally use 20% grid).
On smooth PEI bed, print with 5mm inner and outer brim.
Supports are not needed.
Seam position is set to Nearest, but feel free to adjust it to your preference.
Nastavení tisku (slicuji v PrusaSliceru):
Výška vrstvy 0,15mm (lze i 0,2 ale 0,15 je hezčí) konrétně používám 0,15 BALANCED.
Trysku používám standardní 0,4mm ale je to jedno.
Materiál PLA.
Výplň je též v podstatě jedno (já osobně používám 20% a mřížku).
Na hladké PEI podložce tisknu s límcem vnitřním i vnějším 5mm
Podpěry nejsou potřeba.
Pozice švu mám nejbližší ale nastavte si to dle vašeho uvážení.
