1 / 4
Dutch Row House
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Dutch row house featured on the Stroopwafels box. Roughly 1∶160 scale to a real building.
- Rating
- 4 / 5
- Likes
- 30
- Downloads
- 146
- Makes
- 2
- Views
- 910
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other Art & Designs
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I modeled one of the Dutch row houses featured on the Stroopwafels box. The model is the same size as the picture on the box and roughly 1∶160 scale to a real building. To create the model follow the steps below:
- Print the windows. If they are not printing well try scaling up the size of the model.
- Print the front. To get the best surface finish make sure there are one or two layers of infill. A filament change can be added to make the front details a different color, if these details are not printing well try scaling up the model.
- Print the back.
- Superglue the windows onto the front of the building.
- Superglue the front to the back of the building.
This model was printed on an Anycubic Mega Zero 2.0 with a 0.4 mm nozzle in HATCHBOX PLA filament.
Note: the windows can be difficult to print, make sure the print bed is level and has good adhesion.