Xmaxx Repair Stand
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A stand to storage, maintenance or repair the Traxxas Xmaxx
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 64
- Makes
- 0
- Views
- 351
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution — Noncommercial
Since I didn't have a real stand for my Xmaxx and I found the original one from Traxxas too impractical, I built something myself. As a template, I took the standard RC car stand. In addition, I modularized the entire booth a bit. This has the advantage that you don't have to print everything at once, you can influence the color a bit and it can be further developed or the height can be adjusted. To adjust the height, the middle piece in the slicer must be lengthened or shortened.
The dish can be locked in place with a pin. For the base I have created three variants, with or without compartments. Between the dish and the upper part, a turntable with ball bearings is mounted (80x80mm).