Lara croft/Tomb Raider - HueForge
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
An attempt to remake the iconic figure of Tom Raider using HueForge.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 12
- Makes
- 0
- Views
- 205
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- 2D Plates & Logos
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 116.43x200mm in size
You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.24mm and the Actual Thickness is 1.92mm
Filaments Used:
#171d1a PLA eSun Black (MATTE) Transmission Distance: 0.1
#774b27 PLA Elegoo Brown Transmission Distance: 1.4
#f7d7b7 PLA Elegoo Beige (MATTE) Transmission Distance: 2.1
#1a3d25 PLA eSun Pine Green Transmission Distance: 0.1
#5ae0cf PLA Sunlu Mint Green Transmission Distance: 3.2
#394a59 PLA eSun Dark Grey Transmission Distance: 0.2
#ffffff PLA eSun Cold White Transmission Distance: 2.2
This print uses 7 unique filaments
Swap Instructions:
Start with Black (MATTE)
At layer #9 (0.8mm) swap to Brown
At layer #11 (0.96mm) swap to Beige (MATTE)
At layer #14 (1.2mm) swap to Pine Green
At layer #18 (1.52mm) swap to Mint Green
At layer #20 (1.68mm) swap to Dark Grey
At layer #22 (1.84mm) swap to Cold White for the rest.