Jeep CJ7 hueforge
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
We love the snow
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 10
- Makes
- 0
- Views
- 100
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- 2D Plates & Logos
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Project: CJ7.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 200x138.8mm in size
You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.24mm and the Actual Thickness is 2.16mm
Filaments Used:
#000000 PLA+ Esun Black Transmission Distance: 0.1
#08abfb PLA Polymaker Panchroma Cyan Translucent Transmission Distance: 5.1
#ffcbac PLA Sunlu Skin Beige Transmission Distance: 7.4
#cfe3c0 PLA Prusament Galaxy Silver Transmission Distance: 6.4
#ffffff PLA+ Sunlu White Transmission Distance: 7
This print uses 5 unique filaments
Swap Instructions:
Start with Black
At layer #8 (0.72mm) swap to Cyan Translucent
At layer #12 (1.04mm) swap to Skin Beige
At layer #16 (1.36mm) swap to Galaxy Silver
At layer #18 (1.52mm) swap to White for the rest.