1 / 4
Articulated Fridge Magnet - Slug 5mmx3mm magnets
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Articulated Fridge Magnet - Slug 5mmx3mm magnets
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 23
- Makes
- 0
- Views
- 81
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
The original slug is great, but i don't have those magnets. I use 5mmx3mm magnets quite a bit, so this is what I used here.
Enjoy!
- Material: PLA
- First layer height: 0.3mm
- Layer height: 0.2mm
- Wall thickness: 0.45mm
- Wall loops: 2
- Wall order: Outer/Inner
- Wall generator: Arachne
- Infill density: 12%
- Nozzle size: 0.4mm
- Supports: No!
Print time for me was 35min