DONKY FILES

Build Disclaimer

This is a fully DIY platform. The Donky kit does not include electronics. Components such as the controller, BMS, battery pack, wiring harness, and other electrical parts must be sourced and installed by the builder.

There are currently no prebuilt battery options specifically designed for this build. You will need to either:

• Source a qualified battery builder, or

• Build your own battery pack

Building or installing lithium battery systems carries inherent risks, including fire, equipment damage, or personal injury if done incorrectly. Proper knowledge of battery construction, wiring, and electrical safety is required.

This kit is intended for experienced builders who understand DIY Onewheel-style builds and electrical systems. If you have not built a board before, this should not be your first build unless you are working directly with someone experienced and trustworthy.

Hardware required can be found here Build Guide.

Community for questions Discord


UPDATES

2/16/26
Files are up to date with final revisions.

4/19/26
Added griptape dxf for use with https://studio.grippysheet.com/.

4/22/26
Added dxf for metal backing plate to reduce flex when using TPU footpads.
Shaped for use with FlightFins Falcon II foot hooks.

4/29/26
Updates "Boxes" File added more clearance for screw holes.

5/12/26
M4x16 screws for boxes had trouble reaching lids, implemented fix.

6/7/26
Fixed thin area in front boxes caused a small hole when printing with 0.6mm nozzle. If you printed a box before this date please reprint a box. 

6/9/26 
Better fixes to update prior.

6/13/26
Forgot to update footpads. Files replaced.

6/14/26
Added TPU griptape.

8/16/26
Added V2 Casings and Lids for Batch 2+
Boxes: Swapped over to a lock nut design, only inserts required are the M3s for access lids
Lids: Unified lid design (front can fit on rear and vice versa).