Scrap soap mold – Large
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A mold to reuse the scraps of soap
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 18
- Makes
- 0
- Views
- 105
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Bathroom
- License
- Open Community License v1
This is a hand press that molds scraps of soap into a new bar. The scraps need to be wet to be pliable and moldable.
There are some internal caps that allow you to remove the new bar easier. This are a bit tight, to reduce the soap from leaking outside the forming chamber. These can be split into two to make it easier
The tolerances for these caps is very tight. If your printer needs more space for these to enter the press, you can scale them a little smaller.
Don't need supports, and works in pla, but probably petg would be better. Just import the model as separate parts and and allow the slicer to auto rotate them.
This is a larger version of the original one
If you give the soap a few days to dry after pressing, it comes out easier
the seams are the biggest issue. Either you need your printer to do a good job or you will need to smooth them down