Duplo To Brio Converter Brick - rmx
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
The original design is nice but I found the track height is 8.5 mm instead of 9 mm for my railway system causing all…
- Rating
- 5 / 5
- Likes
- 3
- Downloads
- 21
- Makes
- 0
- Views
- 61
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Building Toys
- License
- Creative Commons — Attribution — Share Alike
The original design is nice but I found the track height is 8.5 mm instead of 9 mm for my railway system causing all powered locomotives to stuck on it.
Since I had to adjust track height I changed all measures to fit user Smuk3D brio system as in the attached .pdf file.
I also made an additional smaller design for 2x2 stud brick.
Print Settings
Printer:
Print Rite DIY
Rafts:
No
Supports:
Yes
Resolution:
0.2
Infill:
20 %
Notes:
Printed in PLA with 3 perimeters and 4 top//bottom solid layers.
I would recommend adding some turns of brim and fan at 100%.
I had warping issues on corners even with the heated bed turned on.
Category: Construction Toys