1 / 2
Ruixin rail adapter
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Adapt RX009 clamps to tsprof/xarilk/sytools rails
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 18
- Makes
- 0
- Views
- 370
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial
This is for adapting a Sy Tools Ruixin rx0009 accessory clamp to the more common rails. Only brass inserts needed hardware besides the clamp kit (found on Aliexpress) and a sharpener like Xarilk Gen 3.
Hole for mounting to sharpener rail is specified 7.2mm and I used a brass insert M6 OD 8mm. Xarilk uses M6 screws for the clamps so you can use them. I you don't have brass inserts the hole goes through so you can use a longer bolt and a nut.
Print in direction seen on screen capture. Print with support - I used the auto generted in Orca Slicer.