1 / 6
Pennywise Can Holder / Beer mug
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Can Holder for 0.5L Cans (12oz+330ml can inserts)
- Rating
- 0 / 5
- Likes
- 45
- Downloads
- 194
- Makes
- 1
- Views
- 571
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Gadgets
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Can holder in the shape of the Pennywise
- Fits long EU cans with a capacity of 0.5L. You can also use my insert for 12oz or 330ml (slim) cans (link below)
- Recommended print settings: PLA, 0.2mm layers, 2walls, 8%gyroid, Automatic Tree supports (at least 28°)
- If you want to have the handle on the opposite side (left-handed), just right-click on the object in the slicer and put mirror by the Y axis.
- Be careful when removing the supports from the collar, I had to use the tip of a knife to pull them out. But the print went beyond expectations.
Here is the link to my model of the insert that you can use in 0.5L holders with your 12oz , or 330ml slim cans, and 10mm riser if you want better access to the top. They are scalable, so you can make them smaller or larger in your slicer.
https://www.printables.com/model/1322047-can-holder-riser-inserts-12oz-slim-330ml-scalable
Happy printing:)
Štítky