1 / 3
Voron Magnetic Door Hinges
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Magnetic Hinges that scrw into the doors of a voron (Tested on a V2.4)
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 11
- Makes
- 0
- Views
- 159
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Voron Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Made this to add to my stealth changer (SC.0195) to make servicing easier. All of the other magnetic doors I found required tape and I didn't like that. This model uses m5 screws directly through the door to prevent slipping. I found that with n52 6x3mm magnets 2 hinges per door was plenty on my 300mm V2.4
BOM (Per hinge):
four 6x3mm magnets
two m5 x 12mm screws
two m5 nuts
one/two drops of superglue
Steps:
- Print 1 door part and 1 frame part per hinge
- Install magnets being carefull of polarity
- Print drilling template
- Drill holes in door
- Screw on and enjoy