Subaru WRX Center Console Latch (Part Number NF188W)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Replacement Latch for the Subaru WRX Center Console Lid
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 58
- Makes
- 0
- Views
- 306
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Noncommercial
If you own a WRX then you've very likely googled “subaru wrx center console wont latch” and found a mountain of others in the exact same situation and with no solution. You've either learned to live with it, or cobbled together some spacer made from whatever was on hand in order to force the OEM latch to be at an angle with the lid so that it kinda sorta catches, but not really…
As much as OEM is supposed to be the best, the reality is that the latch is a poorly designed part and over time it will either deform (like mine), or the tiny sliver of plastic in the center console it latches onto will wear away. With only 2mm of depth on the tiny plastic hook piece that's meant to hold the entire armrest lid closed, it's inevitable that it will fail eventually.
As an example, here's a video of my OEM latch doing absolutely nothing.
Regardless… Subaru surprisingly does not sell the latch individually, so if you have a faulty center console latch that just won't catch, then this is the model for you!
There are several versions:
"subaru_latch_NF188W" is a 1-1 replica of the OEM latch. If you want an absolutely identical replacement latch then print this one. (Though I would recommend printing the “adjusted_0mm” version (explanation immediately below)
The other parts are titled “adusted_Xmm”. This Xmm value indicates how much further back the actual hook portion of the latch has been moved relative to OEM. These latches also have the hinge cutout at an angle in order to minimize supports for 3d printing. The photos are of the “adusted_0mm” model compared to the OEM latch.
If you watched the video and have the same problem where the latch just isn't catching, you should try one of these modified latches.
Here is a video of my center console actually latching using the “adjusted_2mm” version.
Printing:
I had great success with PETG-CF. Regular ole PETG will likely work just as well, though the latch might not be as stiff? YMMV.
I'd stay away from PLA - this piece needs to be reliably flexible, and it does bend quite a bit under regular use.
As far as printing parameters go, just make sure that it's printing nothing but walls (no infill). It's thin enough that that a 0.4mm nozzle with 3 walls will not print any infill regardless of other settings.
IMPORTANT: make sure to orient the latch on its side! The layer lines should be orthogonal to the bend direction. The only supports you should need are for the hook portion.