Verstegen 3x3 spice rack gridfinity fit
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A 3x3 grid which follows the bottom shape of the verstegen spice/herbs bins with a 4x4 gridfinity bottom.
- Rating
- 5 / 5
- Likes
- 10
- Downloads
- 66
- Makes
- 1
- Views
- 600
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
A 3x3 grid which follows the bottom shape of the verstegen spice/herbs bins with a 4x4 gridfinity bottom.A 3x3 grid which follows the bottom shape of the verstegen spice/herbs bins with a 4x4 gridfinity bottom.
Printed the one on the back in the first picture with varying infill (some 0%, some 10%) but that got issues on the top layer. Then got one with 10% grid infill and 20mm structural, and that worked out perfectly. There's probably some room for optimization there so that the print won't take so long.
Had the top layer of the inside of the bins set to concentric to follow along in the circular pattern, then changed to monotonic for the uppermost layer. You can check out the .3mf and .bgcode (for Pruse CORE One, 0.4mm brass, PLA) for results.