1 / 4
Rim Cap Nabendeckel Honda VFR 1200 — image 1
1 / 4

Rim Cap Nabendeckel Honda VFR 1200

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Deckel zur Abdeckung der Nabe bei der Honda VFR 1200.

Rating
5 / 5
Likes
5
Downloads
30
Makes
1
Views
146
Reviews
1

Updated at source:

Model information

Category
Automotive
License
Standard Digital File License

Deckel mit Emblem zur Abdeckung der Nabe bei der Honda VFR 1200. Felge Standard,keine Zubehörräder

Hält durch einstecken ohne Kleben und lässt sich nur bei demontiertem Rad wieder entfernen z.B. beim Reifenwechsel.

Durchmesser aussen 41,5mm Innen 28mm

Hab den Deckel vorerst aus PLA+ gedruckt mit Farbwechsel ohne MMU.

PETG wäre vermutlich besser geeignet aufgrund der thermischen Faktoren.

Layer 0,15mm , 2Perimeter und 15% Infill waren hier beim Setting o.k.

------------------------------------------------------------------------------------

Cap with emblem to cover the hub on the Honda VFR 1200. Standard rim, no aftermarket wheels. Held in place by simply plugging it in—no adhesive required—and can only be removed when the wheel is dismounted, e.g., during a tire change. Outer diameter: 41.5 mm Inner diameter: 28 mm I initially printed the cap using PLA+ with a manual color change (no MMU). PETG would likely be more suitable due to thermal considerations. Layer height: 0.15 mm 2 perimeters 15% infill — these settings worked fine for this application.

Tags