YKK Zip puller
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A replacement puller tag for a small YKK zip.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 12
- Makes
- 0
- Views
- 95
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Fashion Accessories
- License
- Creative Commons — Attribution
This is the type of YKK zip has a puller which is half metal and half rubber. Over time the rubber part breaks. This model provides a push-in replacement. I suggest printing in a semi-flexible. In the picture I printed it in PP, but I'm sure PA would also be suitable or a harder TPU.
It holds with friction as the metal tab has a square hole which interfaces with a taper in the slot of the puller making it easier to push in than disconnect. Saying that, a stop of PP primer and superglue would be stronger.
The model pictured I printed with 0.1 mm layer height with a 0.4 mm nozzle in my Core One and a PP heated bed. No brim or supports were needed.