1 / 1
Replacement Syringe Plunger for Crunchlabs 'Wet Bandit' Build Box — image 1

Replacement Syringe Plunger for Crunchlabs 'Wet Bandit' Build Box

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Replacement Syringe plunger for Crunchlabs 'Wet Bandit' Build Box

Rating
0 / 5
Likes
4
Downloads
14
Makes
0
Views
109
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial

Made/Designed based on the existing syringe plunger out of the crunchlabs ‘Wet Bandit’ build box. The original, in this case, had been broken in an unfortunate accident while hurriedly running up stairs… Someone else may have been operating & directing a slightly larger and more powerful hose on the person carrying this toy… ;)

You will need the original rubber seal. I made the front flat hand area just a little larger on this part so small hands can operate it better - it does not fit through the original wooden plate on the toy. You may need to remove the rubber seal, stick the plunger through the wooden plate, attach the rubber seal and then attach the wooden plate. 

Recommended to print flat on your build plate in your choice of moisture resistant materials - I printed in red ABS (maybe not the best choice). Could not get my printer to print this vertically very well - and when I did get it to finally print this way, the young user immediately broke it along layer lines.