The Enchanted Tower: Evil Sorcerer figure
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A replacement figure from the board game Enchanted Tower. There is a space for a magnet at the bottom.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 14
- Makes
- 0
- Views
- 338
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Board Games
- License
- Creative Commons — Attribution
The evil sorcerer is a replacement character from the board game Enchanted Tower. There is a space for a magnet at the bottom, the two-color print is made of PVB smoothed by IPA.
Enchanted Tower (Der verzauberte Turm in origin, Začarovaná věž in Czech) is a great board game for preschoolers. But the figures are so beautiful that children quickly lose them :)
Description, material, printing setup
I tried to create a model as similar as possible to the original wooden figure. The print is therefore two-color (download * .3mf!). I printed from a blue and transparent PVB filament from Průša Research. For PVB printing parameters, see the Průša Knowledge Base.
Variants
The basic model has a hole for a magnet with a diameter of 12.5 mm and a height of 6 mm. If you need a different size (or shape) of the magnet, let me know, I'll add another variant of the model.
Postproduction
I soaked the model three times in isopropyl alcohol (IPA) for 15 seconds, allowing it to evaporate in air for 5 minutes after each soak.