1 / 2
Sanding disc trays, 6 slots for 5" and 6" discs — image 1
1 / 2

Sanding disc trays, 6 slots for 5" and 6" discs

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Trays for 5" and 6" sanding discs, polishing pads, and other flat items.

Rating
0 / 5
Likes
35
Downloads
258
Makes
0
Views
916
Reviews
0

Updated at source:

Model information

Category
Organizers
License
Creative Commons — Attribution

I designed this tray after looking at a number of different designs that didn't meet my needs.  The objectives were:

  • Slots wide enough to hold full packs of 50-100 discs
  • Maximum number of slots that would fit on a reasonable printer bed
  • Rectangular footprint to allow a few trays to pack together without wasted space
  • Parameterized design to handle various common disc sizes

The CAD is in OnShape (link below) and is fully parameterized via code in a Feature Studio.  Definitions for the 5" and 6" disc trays are already realized there, and it would be simple to add more variables to define trays for other less common sizes like the 2" and 3" discs.

You can print this in your material of choice.  I like PETG for trays and racks because of the negligible shrinkage and warp.  0.3mm layer height should be adequate.

OnShape model:  https://cad.onshape.com/documents/97f254269dd5df1c53c7543e/w/e9c39e6dbfa7a01e23476fe3/e/15bbfbd933a84bca63529b46

 

Tags