Palette for paintings
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Tool for painting
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 58
- Makes
- 0
- Views
- 179
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Art & Designs
- License
- Creative Commons — Attribution — Share Alike
V.2 Avalible!!!
I have been using the palette for two months, but it has become a little small, so I have made some small modifications for my comfort:
- The height of the paddle has been increased
- The rods for the dry brush have been reversed
- The size has been doubled for the wet palette
- Holes have been added for more brushes, pencils or blades
- 5 x 6mm
- 5 x 7mm
- 5 x 8mm
- 4 x 9mm
- The base has been reinforced to prevent water seepage
- The holes have been plugged at the bottom so that the brushes stop
i leave both models for you to use the one you like the most :)
Palette for colors (250x220x42). It has a small container to fill with water, a small tray to hold the standard size brushes, another small section for the wet palette and several small sections for colors and mixing.
Printed with elegoo PLA silk.
Print config:
- extruder: 0.4mm
- layer: 0.28mm
- walls: 3mm
- infill: 10%
- print time: 4h 34m
- cost: 208,16g
NOTE: I had to cover the bottom of the water container with epoxy glue, to cover the small slots where the water was filtered, after that there is no more leakage :)